Certainty when it matters most
A monitor that takes the journey with patients during their hospital stay, the Capnostream™ 35 portable respiratory monitor delivers continuous monitoring in virtually any clinical setting. From a patient under sedation during a procedure to monitoring a patient in the medical-surgical unit, the Capnostream™ 35 portable respiratory monitor offers quick, easy, and reliable access to respiratory status.1 The Capnostream™ 35 portable respiratory monitor provides insights on respiratory status that clinicians can use to intervene early and fast if a patient begins showing signs of respiratory compromise.- Combined with proprietary integrated algorithms, and alarm and data management, the monitor provides key insights for safe and effective care.
- The monitor’s portable, rugged, lightweight, ergonomic design helps facilitate moving a patient between hospital areas of care.
- Proprietary Molecular Correlation Spectroscopy™ technology uses a CO2 specific infrared (IR) wavelength that is highly accurate and unaffected by the presence of other gases (e.g., O2, N2O, He or inhaled anesthetics.)2
- Smart Capnography™ algorithms are engineered to alert clinicians to early indication of changes in respiratory status that may need intervention, while also reducing nonactionable alarms to help mitigate alarm fatigue.2
- The Integrated Pulmonary Index™ algorithm combines four real-time measures — etCO2, SpO2, respiratory rate, and pulse rate — to provide an inclusive assessment of a patient’s respiratory status in a single number.†
- Connectivity to web-enabled devices on a secured hospital Wi-Fi network is offered for advanced data management and remote patient monitoring.
Flexible monitoring options so clinicians can choose what and how to monitor respiratory status
- Access continuous, noninvasive, real-time respiratory status monitoring of etCO2 and capnography-derived respiration rate using a Microstream™ Advance filter line. The Nellcor™ respiratory rate sensor can also be used alone to measure SpO2, pulse rate and pulse oximetry-derived respiration rate (RRPleth).
- Continuous monitoring of respiration rate, including pleth-based respiratory rate, offers an early indication of respiratory compromise compared to continuous SpO2 monitoring alone.3
- In addition to having the option to measure pleth-based respiration rate, the Nellcor™ saturation pattern detection (SPD) algorithm identifies evolving SpO2 patterns in real-time, which can indicate repetitive reduction in airflow (RRia). One of the more well-known examples of RRiA is obstructive sleep apnea.‡
| General characteristics | |
|---|---|
| Unit dimensions | 213 mm (h) x 137 mm (w) x 55 mm (d) [8.38 in (h) x 5.39 in (w) x 2.16 in (d)] |
| Unit weight | 1 kg (2.2 lb) |
| Power supply | |
| Input power | 100–240 VAC, 50/60 Hz, ± 10% |
| Battery | |
| Battery type | Lithium ion |
| Battery pack nominal voltage and energy | 7.2V; 18.72Wh |
| Battery operation | 3 hours for removable battery pack; 20 minutes for internal battery pack |
| Battery charging time | Up to 5 hours when the monitor is off and up to 8 hours when the monitor is on, for both batteries |
| Display | |
| Screen | 109 mm (4.3 in) color TFT display Pixel pitch: 0.198 (horizontal) x 0.198 (vertical) mm Active display area: 95.04 (horizontal) x 53.856 (vertical) mm Resolution: 480 x 272 pixels Viewing angle: (vertical) 125° Viewing angle: (horizontal) 140° |
| Trace speed | 3.0, 6.3, 12.5, and 25 mm/second |
| Waveform sampling rate | 77.82 samples/second for SpO2 (fixed) 20 samples/second for capnography (fixed) |
| Trend storage | 48 hours with 1 second resolution |
| Trend display | Graphical display: 1 hour, 2 hour, 4 hour, 8 hour, 12 hour views Tabular display intervals: 1 second, 5 seconds, 15 seconds, 30 seconds, 1 minute, 5 minutes, 15 minutes, 30 minutes, 1 hour |
| Algorithms | |
| Integrated Pulmonary Index™ algorithm, Nellcor™ SatSeconds technology, Apnea-Sat Alert™ algorithm, Smart Alarm For Respiratory Analysis™ algorithm | |
| Communication interface | |
| Wi-Fi (Vital Sync™ virtual patient monitoring platform connectivity option) and file transfer via USB flash drive or microSD card | |
| Microstream™ capnography | |
| CO2 units | mmHg or kPa or Vol% |
| CO2, etCO2 range | 0–150 mmHg |
| CO2 waveform resolution | 0.1 mmHg |
| etCO2 resolution | 1 mmHg |
| CO2 accuracy | 0–38 mmHg: ±2 mmHg 39–150 mmHg: ± (5% of reading + 0.08 for every 1 mmHg above 38 mmHg) |
| Respiration rate range | 0–150 bpm |
| Respiration rate accuracy | 0–70 bpm: ±1 bpm 71–120 bpm: ±2 bpm 121–150 bpm: ±3 bpm |
| CO2 alarms | No breath, etCO2 High, etCO2 Low, RR High, RR Low, Integrated Pulmonary Index™ algorithm (IPI). IPI also requires pulse oximetry information. |
| Flow rate | 50 (42.5 ≤ flow ≤ 65) mL/minute, flow measured by volume |
| Waveform sampling | 20 samples/second |
| Response time | 2.95 seconds (typical); with use with sampling lines with long tubing, ~5.0 seconds |
| Initialization time | 40 seconds (typical |
| Calibration interval | Initially calibrate after 1,200 operating hours, then once a year or after 4,000 operating hours, whichever comes first |
| Nellcor™ pulse oximetry | |
| SpO2 measurement range | 1 to 100% |
| SpO2 accuracy | |
| Adult and pediatric mode SpO2 range 70 to 100% |
±2 digits over the range of 70 to 100% (when using the accessories defined in this document), including under low perfusion; with motion, ±3 digits; with low saturation (60 to 80%) ±3 digits |
| Infant/neonatal mode SpO2 range 70 to 100% |
±2% over the range of 70 to 100% (when using the accessories defined in the operator’s manual), with motion ±3%; with low saturation (60 to 80%) ±3% |
| Pulse rate range | 20 to 250 bpm Pulse rate values of < 20 bpm shall be displayed as zero bpm Pulse rate values of > 250 bpm shall be displayed as 250 bpm |
| Pulse rate accuracy | ±3 digits over the range of 20 to 250 bpm inclusive, including under low perfusion; with motion, 48 to 127 bpm ±5 digits |
| Alarms | SpO2 High, SpO2 Low, PR High, PR Low |
| Nellcor™ SatSeconds alarm management range | 10–100 |
| Data output and connectivity | |
| Data output | Wi-Fi streaming data using Capnostream™ 20 bedside monitor protocol USB streaming data using Capnostream™ 20p bedside monitor protocol USB storage to flash memory devices MicroSD card storage |
| Connectivity options | Vital Sync™ virtual patient monitoring platform The monitor can connect to an internet network via a dedicated Ethernet cable The monitor can communicate through serial interface via a dedicated serial cable Cerner™* system |
Valoraciones
Clear filtersNo hay valoraciones aún.