| General characteristics |
| Unit dimensions |
213 mm (h) x 137 mm (w) x 55 mm (d) [8.38 in (h) x 5.39 in (w) x 2.16 in (d)] |
| Unit weight |
1 kg (2.2 lb) |
| Power supply |
| Input power |
100–240 VAC, 50/60 Hz, ± 10% |
| Battery |
| Battery type |
Lithium ion |
| Battery pack nominal voltage and energy |
7.2V; 18.72Wh |
| Battery operation |
3 hours for removable battery pack; 20 minutes for internal battery pack |
| Battery charging time |
Up to 5 hours when the monitor is off and up to 8 hours when the monitor is on, for both batteries |
| Display |
| Screen |
109 mm (4.3 in) color TFT display
Pixel pitch: 0.198 (horizontal) x 0.198 (vertical) mm
Active display area: 95.04 (horizontal) x 53.856 (vertical) mm
Resolution: 480 x 272 pixels
Viewing angle: (vertical) 125°
Viewing angle: (horizontal) 140° |
| Trace speed |
3.0, 6.3, 12.5, and 25 mm/second |
| Waveform sampling rate |
77.82 samples/second for SpO2 (fixed)
20 samples/second for capnography (fixed) |
| Trend storage |
48 hours with 1 second resolution |
| Trend display |
Graphical display: 1 hour, 2 hour, 4 hour, 8 hour, 12 hour views
Tabular display intervals: 1 second, 5 seconds, 15 seconds, 30 seconds, 1 minute, 5 minutes, 15 minutes, 30 minutes, 1 hour |
| Algorithms |
| Integrated Pulmonary Index™ algorithm, Nellcor™ SatSeconds technology, Apnea-Sat Alert™ algorithm, Smart Alarm For Respiratory Analysis™ algorithm |
| Communication interface |
| Wi-Fi (Vital Sync™ virtual patient monitoring platform connectivity option) and file transfer via USB flash drive or microSD card |
| Microstream™ capnography |
| CO2 units |
mmHg or kPa or Vol% |
| CO2, etCO2 range |
0–150 mmHg |
| CO2 waveform resolution |
0.1 mmHg |
| etCO2 resolution |
1 mmHg |
| CO2 accuracy |
0–38 mmHg: ±2 mmHg
39–150 mmHg: ± (5% of reading + 0.08 for every 1 mmHg above 38 mmHg) |
| Respiration rate range |
0–150 bpm |
| Respiration rate accuracy |
0–70 bpm: ±1 bpm
71–120 bpm: ±2 bpm
121–150 bpm: ±3 bpm |
| CO2 alarms |
No breath, etCO2 High, etCO2 Low, RR High, RR Low, Integrated Pulmonary Index™ algorithm (IPI). IPI also requires pulse oximetry information. |
| Flow rate |
50 (42.5 ≤ flow ≤ 65) mL/minute, flow measured by volume |
| Waveform sampling |
20 samples/second |
| Response time |
2.95 seconds (typical); with use with sampling lines with long tubing, ~5.0 seconds |
| Initialization time |
40 seconds (typical |
| Calibration interval |
Initially calibrate after 1,200 operating hours, then once a year or after 4,000 operating hours, whichever comes first |
| Nellcor™ pulse oximetry |
| SpO2 measurement range |
1 to 100% |
| SpO2 accuracy |
Adult and pediatric mode
SpO2 range 70 to 100% |
±2 digits over the range of 70 to 100% (when using the accessories defined in this document), including under low perfusion; with motion, ±3 digits; with low saturation (60 to 80%) ±3 digits |
Infant/neonatal mode
SpO2 range 70 to 100% |
±2% over the range of 70 to 100% (when using the accessories defined in the operator’s manual), with motion ±3%; with low saturation (60 to 80%) ±3% |
| Pulse rate range |
20 to 250 bpm
Pulse rate values of < 20 bpm shall be displayed as zero bpm
Pulse rate values of > 250 bpm shall be displayed as 250 bpm |
| Pulse rate accuracy |
±3 digits over the range of 20 to 250 bpm inclusive, including under low perfusion; with motion, 48 to 127 bpm ±5 digits |
| Alarms |
SpO2 High, SpO2 Low, PR High, PR Low |
| Nellcor™ SatSeconds alarm management range |
10–100 |
| Data output and connectivity |
| Data output |
Wi-Fi streaming data using Capnostream™ 20 bedside monitor protocol
USB streaming data using Capnostream™ 20p bedside monitor protocol
USB storage to flash memory devices
MicroSD card storage |
| Connectivity options |
Vital Sync™ virtual patient monitoring platform
The monitor can connect to an internet network via a dedicated Ethernet cable
The monitor can communicate through serial interface via a dedicated serial cable
Cerner™* system |
Reviews
Clear filtersThere are no reviews yet.